It is understood that the fifth generation of outdoor LED driver power supply has made great breakthroughs in key technical indicators, intelligence and reliability, and has applied a number of patented technologies. The power range of the product is wide, divided into three power segments of 35W, 50W, 75W, 96W, 150W, 200W, 240W and 320W. The safe low voltage design meets the safety requirements of developed countries such as Europe and America.
According to Chen Hao, project manager of Maoshuo Power R&D Department, this series of products is highly integrated, and the size is miniaturized by adopting modular lines, which resolves the pressure on the size requirements of the lamps. The volume of this series of products has advantages over similar products on the market; compared with previous generations, the overall efficiency has increased by 2-4 percentage points, which will greatly reduce the overall temperature rise of the product, thereby improving the product's Life and reliability; can be driven from a single LED to the rated number of LEDs in series.
In addition, it can work in constant voltage or constant current drive mode, and the constant current point can be set by itself; the output voltage is less than 60Vdc; the product standard is designed as a single output, which can realize multi-channel drive through the extension cable.
At the same time, the new generation of intelligent drive power is more complete than before. Firstly, for the harsh practical application environment such as LED street light, tunnel light and landscape lighting, the patented products of new technology, new technology and new process are adopted.
Secondly, it supports a variety of intelligent dimming control, which is divided into the following two categories: the system with and without the system:
There are two types of products without control system. One is that the output current is adjustable through the built-in high-precision potentiometer; the other is the intelligent time control product, the built-in MCU of the power supply, and the current adjustment and timing dimming through the program to achieve intelligent time control.
There are also two types of products with system control power supply. One is to support 0-10V and PWM two-in-one dimming. It can be controlled by intelligent system through external signal converter, or it can connect external independent 0-10V signal or PWM signal. control. The second is the embedded power carrier (PLC) intelligent power supply, built-in PLC and other intelligent receiving modules to achieve remote stepless dimming and control.
Military battery has a wide application on some high-tech euquipment including military communications equipment, submarine, drone , warship, government and so on .
The design for Military Battery Pack is more strict than normal lithium or Lipo Battery packs ,because it must meet some tough requirements as ;
1, high-level safety : military Lithium Battery was demanded to provide high-level safety and will not cause any death or accident with High intensity impact and and hit.
2, high reliability: the Military Battery must be reliable and could not causing any problems to the equipments during operating .
3, High environmental adaptability: the military Battery Pack is demanded to use in different temperature ,air pressure and other enviornmental condition.
Military Batteries : Ni-Mh Battery Pack BB-390/U
Besides ,the military always have a strict standard on low power self-consuming and deep life cycles .so these above standard has made it special from the other Lithium Battery Pack or other battery packs which applied to life .
Military Batteries
Military Batteries,Military Battery,Military Vehicle Battery,Military Solar Battery
YFJ TECHNOLOGY (HK) CO.,LIMITED , http://www.yfjpower.com