On the afternoon of March 18th, sponsored by Gaogong LED, jointly sponsored by Fujian Lighting Association and Xiamen LED Promotion Center, Xiamen Photonics Industry Association, Yunxiao County Optoelectronic Industry Association, “2014 China LED Lighting Supply Chain Good Product Tour Seminar†The Ming Dynasty Hall of the Xiamen Hotel in Xiamen was held.
　　 During the meeting, Dr. Zhang Xiaofei, Chairman of Gaogong LED, Zhang Zhennan, R&D Manager of Jingtai Optoelectronics, Zhang Luhua, Director of Sima De Optoelectronics Project, Chen Junji, Director of Accumulation Technology Lighting Products, Dr. Yi Yangbo, Deputy General Manager of Xinpeng Microelectronics, Saudi Basic Innovation Plastics Application Engineer Chen Zhaojun, overclocking three science and technology engineering director Wen Kongliang and other elites together with hundreds of LED lighting related companies to study and discuss how to choose high-quality LED lamp beads, EMC packaging advantages, lamp drivers and LED heat dissipation materials and solutions And other topics for in-depth discussion.
The seminar was full of people, the venue was full, the temporary chairs occupied the corridors and aisles on both sides, and even some guests could only stand and attend the meeting.
In view of how to improve the value of LED lighting products, Dr. Chen Junji suggested that participants can refer to two directions: First, focus on improving the brightness (efficiency) of light; Second, adopt dimming scheme to increase product differentiation. In the field of dimming, you can think in the following four directions: automatic brightness adjustment, temperature automatic balance control, manual dimming control, and motion sensing.
　　 1. Automatic brightness adjustment
By adding RALS to the circuit, it is possible to sense the intensity of the light source, adjust the amount of light, and reduce unnecessary energy waste.
　　 2. Temperature automatic balance control
For high temperature environment and closed luminaire design, adding RNTC to the drive circuit can sense whether the temperature of the luminaire is too high, gradually reduce the brightness of the luminaire, and lower the temperature, which helps to extend the service life of the whole luminaire.
　　 3. Manual dimming control
Second-order dimming (100%-30%) is currently used in many conference room situations. When meeting, you can use 100% full-bright mode. If you need to watch the slide, turn to 30% mode.
Fourth-order dimming (100%-70%-40%-15%) can choose appropriate brightness according to outdoor brightness, such as sunny, cloudy, dusk, etc., to avoid unnecessary energy waste.
　　 4. Mobile sensing
This application has been widely used in parking lots. When the vehicle enters the parking lot, the sensor can change the original 30% brightness to the full light 100% mode once it is sensed. With the simple power line control (Power Line Control), it is not necessary to adjust the original wiring, and the construction is quite simple.
　　 During the meeting, Dr. Zhang Xiaofei, Chairman of Gaogong LED, Zhang Zhennan, R&D Manager of Jingtai Optoelectronics, Zhang Luhua, Director of Sima De Optoelectronics Project, Chen Junji, Director of Accumulation Technology Lighting Products, Dr. Yi Yangbo, Deputy General Manager of Xinpeng Microelectronics, Saudi Basic Innovation Plastics Application Engineer Chen Zhaojun, overclocking three science and technology engineering director Wen Kongliang and other elites together with hundreds of LED lighting related companies to study and discuss how to choose high-quality LED lamp beads, EMC packaging advantages, lamp drivers and LED heat dissipation materials and solutions And other topics for in-depth discussion.
The seminar was full of people, the venue was full, the temporary chairs occupied the corridors and aisles on both sides, and even some guests could only stand and attend the meeting.
In view of how to improve the value of LED lighting products, Dr. Chen Junji suggested that participants can refer to two directions: First, focus on improving the brightness (efficiency) of light; Second, adopt dimming scheme to increase product differentiation. In the field of dimming, you can think in the following four directions: automatic brightness adjustment, temperature automatic balance control, manual dimming control, and motion sensing.
　　 1. Automatic brightness adjustment
By adding RALS to the circuit, it is possible to sense the intensity of the light source, adjust the amount of light, and reduce unnecessary energy waste.
　　 2. Temperature automatic balance control
For high temperature environment and closed luminaire design, adding RNTC to the drive circuit can sense whether the temperature of the luminaire is too high, gradually reduce the brightness of the luminaire, and lower the temperature, which helps to extend the service life of the whole luminaire.
　　 3. Manual dimming control
Second-order dimming (100%-30%) is currently used in many conference room situations. When meeting, you can use 100% full-bright mode. If you need to watch the slide, turn to 30% mode.
Fourth-order dimming (100%-70%-40%-15%) can choose appropriate brightness according to outdoor brightness, such as sunny, cloudy, dusk, etc., to avoid unnecessary energy waste.
　　 4. Mobile sensing
This application has been widely used in parking lots. When the vehicle enters the parking lot, the sensor can change the original 30% brightness to the full light 100% mode once it is sensed. With the simple power line control (Power Line Control), it is not necessary to adjust the original wiring, and the construction is quite simple.
Reteck Storage Device Co., Ltd. , https://www.reteck.com