Model NO.: RY
Standard: TUV cUL UL RoHS
Max. Voltage: 250V
Max. Current: 22A
Special: Normally Closed
Certificates: cUL,UL,TUV,RoHS
Life: 100,000 Cycles
Cut Temperature: 55-185
Trademark: 17AMI
Transport Package: Box
Specification: TUV, UL, CUL, ROHS
Origin: Dongguan, Guangdong, China
HS Code: 85365000
Product Description
Â
  1.Rating Voltage: 250 V
  2.Color : Any color is ok
  3. custom-design
  4. High quality and competitive price
  5. The open temperature tolerance is ±5 °C,
  6. Maximum Contact Rating: 10A 15A/ 250 120VA,
  7.The open temperature of YJ001 ranges from 72 °C to 260 °CÂ
  8.Lead wire:YJ001 # black; custom-designed calble is also avaiable
Â
  2.Color : Any color is ok
  3. custom-design
  4. High quality and competitive price
  5. The open temperature tolerance is ±5 °C,
  6. Maximum Contact Rating: 10A 15A/ 250 120VA,
  7.The open temperature of YJ001 ranges from 72 °C to 260 °CÂ
  8.Lead wire:YJ001 # black; custom-designed calble is also avaiable
Â
Â
1.Our shell sliver thickness is 2 time the normal.
2.The movable electrode is silver alloy,and the common electrode is a silver-plated copper.
3.Lead A and lead B silver plated layer thickness is twice the normal.
4.Epoxy is imported from the USA.
5.Quality control center is the word's most advanced detection method.
Â
2.The movable electrode is silver alloy,and the common electrode is a silver-plated copper.
3.Lead A and lead B silver plated layer thickness is twice the normal.
4.Epoxy is imported from the USA.
5.Quality control center is the word's most advanced detection method.
Â
Â
Tf-Rated functioning temperature |
The temperature at which a Thermal Cutoff changes its state of conductivity to open circuit detection current. The tolerance according to IEC60691 is from +0 to -10 C.(With Japan Electrical Appliance and Material Law, on the other hand, they must function in the tolerance range of ±7 C.). |
||
Fusing(Cut)-off temperature |
The Fusing-off temperature indicates value measured in silicon oil with a temperature increased by 0.5-1 C per minute and a detective current 10mA or less. |
||
Th-Holding temperature |
The maximum temperature at which a thermal Cutoff will not cause a change in state of conductivity to open circuit while conducting rated current for 168 hours. This rating is required by safety standards based on IEC60691. |
||
Tm-Maximum temperature limit |
The maximum temperature at which a Thermal Cutoff can be maintained for 10 minutes without reclosing. This rating is required by safety standards based on IEC60691. |
||
Ir-Rated current |
The allowable maximum current which a Thermal Cutoff is able to carry. |
||
Ur-Rated voltage |
The allowable maximum voltage which a Thermal Cutoff is able to applied. |
||
Â
Â
Â
Features.
★Extremely sensitive to ambient temperature.
★Turn off the power at once.
★Precise and stable functioning characteristic.
★Compact, epoxy-sealed construction.
★Reliable. Approved by various international safety standards.(ISO90012008/UL/CUL/TUV/PSE/CCC/CB)
★Make the whole process of strict quality management.
★Manufacturing process using the most advanced automation equipment.
★Painted with the most advanced automated test equipment, 100% after the inspection.
★It meets the environmental requirements of ROHS/REACH.
Â
★Turn off the power at once.
★Precise and stable functioning characteristic.
★Compact, epoxy-sealed construction.
★Reliable. Approved by various international safety standards.(ISO90012008/UL/CUL/TUV/PSE/CCC/CB)
★Make the whole process of strict quality management.
★Manufacturing process using the most advanced automation equipment.
★Painted with the most advanced automated test equipment, 100% after the inspection.
★It meets the environmental requirements of ROHS/REACH.
Â
Applicatuin.
★Appliance: Electronicion, Hair dryer, Heater, Coffeemaker, Water dispenser, Baker, Electric cooker Electric pressure cooker. Electric kettle, Microwave oven, Air-Conditioner, Refrigerators,Washing machine, Water heater, Range hood, Disinfection cabinet, and so on.
★Office Appliances: Photocopier Fax machine, Scanner, Printer, Paper shreader.
★Appliances Accessories: Voltage Transformer, Adaptor, Electricmotors, PC boards, Connector, and so on.
★Electronics Components: Capacitor, Resistor, Batteries and so on.
★Others: Massage appliances, Pharmaceuticale equipments, Electronic toys, and so on.
★Office Appliances: Photocopier Fax machine, Scanner, Printer, Paper shreader.
★Appliances Accessories: Voltage Transformer, Adaptor, Electricmotors, PC boards, Connector, and so on.
★Electronics Components: Capacitor, Resistor, Batteries and so on.
★Others: Massage appliances, Pharmaceuticale equipments, Electronic toys, and so on.
| -Why choose us--- |
Â
|  Guanjun (L&G) Electronics specialize in this field more than 20 years,with good quality and pretty competitive price |
| . Variety of Designs, Provide Professional &Â Original Fashionable Designs, with more than thousand designs |
| . Original manufacturer with direct factory price, Competitive &Â Fashionable |
| . High management Standard for quality control |
| . Small order acceptable: 500pcs are welcome |
| . Safe payment terms: T/T, Western Union, are available |
| . Prompt Delivery &Â Lowest shipping cost :Â We can ship out within 30 days for general order |
| . OEM available, Customers' designs are warmly welcome |
1.Once we get your inquire for our switches, we will reply you within 30 min
2.Checking the drawing and all details of our switches with you, if you think it is ok, then we need your signature on our drawing for final confirmation.
3.Quotation will be sent to you accordingly.
4.After getting your signed quotation, samples will be sent to you immediately.
5.If our switches passed your testing, you may release to us.
6.Receiving your official order, we will let you know our shipping date soon.
7.Paying 50% for us, we will start to proceed your order to keep the goods finished on-time.
8.Balance 50% payment before shipment.
9.Getting all payment from you, goods will be shipped to you per your requested shipping way
Samples & Packaging & Shipping:
1)Samples:
A.Free for you, Quantity less than 6 pcs, freight collected.
B.Lead time for samples: 3~7 days for preparing samples.
2) Shipping
A.Couriers:Fedex, DHL, UPS, TNT
B.Other: Air or by Sea
As we have a long time cooperation with Courier agent, we can get a priority price for you. We can quote you the transportation charges at first for your comparasion.
FAQ
Q1--What is your MOQ?
In general ,our MOQ is 500 pcs, it will be more convenient and safety on packaging. Of course, it can be negotiable according to your situation.
Q2--What is the delivery time ?
3-7 days for samples; 10-30 days for batch goods.
Q3--Can you give me samples to test and how many samples?
Yes, we provide free samples, with shipping and taxes paid by the buyer. Usually, free samples are 1~10 pieces.
Q4--Does your products through UL, ROHS certification and so on?
Yes, our switches are with UL, CUL, VDE, TUV, ENEC, CE, CQC, Nemko, CB approved, meet EU, RoHS standard.
Q5--Can you accept OEM?
Yes, we can accept OEM and ODM, they are welcome by us. But please offer us your authorization certification.
Q6--Is there cheap shipping cost to our country?
For small order, express will be best. And for bulk order, shipping by sea is better, but it takes much time.
Â
Splicing Fitting,Coupling ,Splicing Fittings ,Electricity Power Fitting
Insulated Terminal Ends Co., Lt d , http://www.nbterminal.com